OUTBOARD INSTALLATION
IMPORTANT: The idle stop screw must be touching the stop.
a
a -
Idle stop screw
b -
Idle stop
5. Lock the barrel holder in place with the cable latch.
Front Clamp Reassembly
IMPORTANT: Sufficient slack must exist in engine wiring harness, battery
cables, fuel hose, and oil hoses routed between clamp and engine attachment
point, to relieve stress and prevent hoses from being kinked or pinched.
1. Place the neoprene wrap over the wiring, hoses, and control cables.
eng
b
3766
99
7740