Configure System Attributes - Juniper MX2010 Manual

1. Add a password to the root administration user account. Enter a clear-text password.
[edit]
root# set system root-authentication plain-text-password
password
New password:
Retype new password:
2. Create a management console user account.
[edit]
root# set system login user
password
New Password:
Retype new password:
3. Set the user account class to super-user.
[edit]
root@# set system login user

Configure System Attributes

For more information about configuring the backup routing and static routes, see the
Administration Library.
1. Configure the name of the router. If the name includes spaces, enclose the name in quotation marks
(" ").
[edit]
root# set system host-name
NOTE: The DNS server does not use the hostname to resolve to the correct IP address. This
hostname is used to display the name of the Routing Engine in the CLI. For example, the
configured value for the following
prompt when the user is logged in to the CLI:
password
user-name authentication plain-text-password
password
user-name class super-user
host-name
user-name and host-name appears on the command-line
Junos OS
79