Configure System Attributes; Commit The Configuration - Juniper ACX2000 Quick Start Manual

ACX2000 Universal Access Routers Quick Start

Configure System Attributes

1.
2.
3.
4.
5.
6.
7.

Commit the Configuration

1.
16
All manuals and user guides at all-guides.com
Configure the name of the router. If the name includes spaces, enclose the name in
quotation marks (" ").
[edit]
root@# set system host-name host-name
Configure the router's domain name.
[edit]
root@# set system domain-name domain-name
Configure the IP address and prefix length for the router's Ethernet interface.
[edit]
root@# set interfaces fxp0 unit 0 family inet address address/prefix-length
Configure the IP address of a backup router, which is used only while the routing
protocol is not running.
[edit]
root@# set system backup-router address
Configure the IP address of a DNS server.
[edit]
root@# set system name-server address
(Optional) Configure the static routes to remote subnets with access to the
management port. Access to the management port is limited to the local subnet. To
access the management port from a remote subnet, you need to add a static route
to that subnet within the routing table. For more information about static routes, see
the Junos OS Administration Library for Routing Devices.
[edit]
root@# set routing-options static route remote-subnet next-hop destination-IP retain
no-readvertise
Configure the telnet service at the
[edit]
root@# set system services telnet
(Optional) Display the configuration to verify that it is correct.
[edit]
root@# show
system {
host-name host-name;
domain-name domain-name;
backup-router address;
root-authentication {
authentication-method (password | public-key);
}
name-server {
address;
[edit system services] hierarchy level.
Copyright © 2016, Juniper Networks, Inc.