Configuring The Ip Address Of The Anchor Iplc - Juniper PTX3000 IPLC Features Manual
Packet transport router integrated photonic line system
Hide thumbs
Also See for PTX3000 IPLC:
- Quick start manual (48 pages) ,
- Hardware manual (174 pages) ,
- Quick start manual (37 pages)
Table of Contents
Advertisement
Chapter 6: Configuring the Optical Supervisory Channel in the Amplifier Chain When Using the Optical Inline Amplifier
Related
Documentation
Configuring the IP Address of the Anchor IPLC
Copyright © 2018, Juniper Networks, Inc.
Specify the MAC address for the IPLC OSC management interface.
2.
[edit chassis fpc 3 optical-options amplifier-chain]
user@host# set anchor-iplc
Verify the configuration.
3.
[edit chassis fpc 3 optical-options amplifier-chain]
user@host#
show chassis fpc optical-properties amplifier-chain ila summary
Save the configuration.
4.
[edit chassis fpc 3 optical-options amplifier-chain]
user@host# commit
Understanding Optical Supervisory Channel Communication in the Amplifier Chain on
page 11Configuring the Optical Supervisory Channel Across the Amplifier Chain of the
PTX3000 Integrated Photonic Line System on page 33
Example: Configuring the Optical Supervisory Channel for the Integrated Photonic Line
System and Optical Inline Amplifier on page 73
show chassis fpc optical-properties amplifier-chain ila osc on page 468
To enable optical supervisory channel (OSC) communications and manage optical inline
amplifiers (ILA)s in the amplifier chain, you need to configure the IP address of both the
anchor IPLC and the IPLC in the remote PTX3000 chassis. Use this procedure when you
are using the PTX3000 integrated photonic line system with the optical ILA to enable
OSC communication across the amplifier chain or to enable management of certain
optical ILA parameters through the Junos OS CLI.
NOTE:
All IP addresses associated with the OSC and amplifier chain must
be on the same, private subnet.
NOTE:
You must also configure the IP address on the IPLC module in the
remote PTX3000 integrated photonic line system.
To configure the IP address of the IPLC OSC management interface:
Specify the slot in which the IPLC resides and access the IPLC amplifier chain
1.
configuration hierarchy.
[edit]
user@host# edit chassis fpc fpc-slot
For example:
optical-options amplifier-chain
35
Advertisement
Table of Contents
Troubleshooting
