Honda MUV700 big red Service Manual page 520

REAR DRIVING MECHANISM
20-16
- differential lock clutch housing (by releasing the
shift fork from the sleeve)
- differential half shaft
- lock sleeve
- O-ring
- two dowel pins
Check the splines of the lock sleeve and half shaft
for wear or damage.
Check the steel ball and stopper spring for wear or
damage.
Remove the oil seal.
Remove the fork boll.
Slide the shift fork to release its spring pin from the
spring ends.
Release the fork spring from the spring pin on the
stopper arm.
DOWEL PINS
SHAFT
OIL SEAL
SPRING
ARM