Drive Mode Selector Lever Linkage Removal - Honda MUV700 big red Service Manual

FRONT DRIVING MECHANISM
Connect the 4WD select switch connector.
Install the following:
- left drive shaft (page 19-11)
- front bumper (page 3- 16)
Fill the gear case with the recommended oil (page 4-
16).
Adjust the selector cable (page 19-44).
DRIVE MODE SELECTOR LEVER
LINKAGE
19-42
REMOVAL
Remove the battery box cover (page 21 -6).
Set the drive mode selector lever to the 2WD posi-
tion.
Remove the following :
- selector lever g rip
- cable joint nut
- front differential lock cable
- lever pivot nut and bolt
- selector lever
- lever spring
- cotter pi n and washer
- rear differential lock cable
- arm pivot bolt
- lever arm (from the frame)
- 2WD/4WD selector
cable (from the arm)