Oil Cooler Removal; Oil Cooler Disassembly - Honda MUV700 big red Service Manual

OIL COOLER
REMOVAL
Drain the engine oil (page 4-13).
Drain the coolant (page 7-6).
Remove the following:
- floor panel (page 3-12)
- engine front
cover
(page 3-6)
Release the hose clip and wire band from the stay.
Remove the two joint bolts from each oit pipe ends.
Disconnect the oil pipes from the engine and oil
cooler, and remove them out of the frame.
Remove the O-rings from the oil pipe.
Disconnect the water hoses from the oil coole r.
Remove the two mounting bolts and the oil cooler.
DISASSEMBLY
Remove the following:
- five bolts
- cooler cover
- O-ring
LUBRICATION SYSTEM
D-RING
BOLTS
5-13