Honda MUV700 big red Service Manual page 448

BRAKE SYSTEM
Remove the retaining plate and disconnect the park-
ing brake cable by moving the brake arm inward.
Remove the cable out of the cable holder while
aligning the flat surfaces.
Remove the washer-bolt and cable holder.
Disconnect the brake hose by removing the oil bolt
~;;;;
18-20
and sealing washers.
Remove the two mounting bolts and the brake cali-
per.
Loosen the two slide pin bolts.
Remove the two mounting bolts and brake caliper.
Remove the two slide pin bolts and separate the cal-
iper bracket from the caliper body.
Remove the brake pads.
PIN
BOLTS
CALIPER
PADS
BRACKET