Clearance - Honda MUV700 big red Service Manual

Adjust the valve clearance by loosening the lock nut
and turning the adjusting screw until there is a
slight drag on the feeler gauge.
Hold the adjusting screw and tighten the lock nut.
TORQUE: 17 N'm !1.7 kgf·m, 12Ibf.ft)
After tightening the lock nut, recheck the valve
clearance.
Coat new O-rings with oil and install them into the
groove in each valve adjusting hole cap.
Install the valve adjusting hole caps and lighten the
bolts securely.
Coat new O-rings with oil and i nstall them into the
timing hole and crankshaft hole caps.
Install the timing hole and c rankshaft hole caps, and
tighten them.
TORQUE:
Timing hole cap: 10 N' m
11.0
kgf·m, 7
rbf·tt)
Crankshaft hole cap: 12 N'm (1 .2 kgf·m, 9 IbUt)
Install the following:
- seat under cover (page 3-6)
- mudguard (page 3-12)
Lower the cargo bed.
MAINTENANCE
4-11