Stator/Ckp Sensor Removal/Installation - Honda MUV700 big red Service Manual

Rep/ace the torque
limiter
as
an
assembly
Check the teeth of the reduction gears and torque
li miter for abnormal wear or damage.
Hold the torque limiter in a vise with the special
tool.
Check the slip torque with the special tool and a
torque wrench.
TOOLS:
Torque limiter attachment B 07YMJ· MCF0200 {not
ava ila ble in U.S.A.'
Torque limiter attachment 0 070MJ-HN80100 (not
available in U .S.A.)
STANDARD SLIP TORQUE:
53 - 84 N 'm {S.4 - 8.6 kgf·m, 39 - 62 Ibf·ttl
STATOR/CKP SENSOR REMOVAL!
INSTALLATION
Remove the CKP sensor socket bolts.
Release the wire grommet off the alternator cover.
Remove the four bolts and alternator stator/CKP
sensor assembly.
Install the stator/CKP sensor assembly onto the
alternator cover.
Apply sealant to the wire grommet seating surface
and insta l l the grommet into the cover groove
securely.
Install and tighten the four bolts.
TORQUE: 10 N 'm (1.0 kgf·m , 7 Ibf.ft)
Apply lockmg agent
Install and tighten the socket bolts.
to the CKP sensor
bolt threads.
TORQUE: 6 N ·m (0.6 kgf·m , 4.3 Ibf.ftl
AL TERNATORISTARTER CLUTCH
ATTACHMENT 0
BOLTS
STATOR
BOLTS
STATOR
SOCKET BOLTS I
11-7