Rear Shock Absorber Removal; Rear Shock Absorber Inspection; Rear Shock Absorber Installation - Honda MUV700 big red Service Manual

REAR WHEEL/SUSPENSION
REAR SHOCK ABSORBER
REMOVAL
Raise the rear wheels off the ground (page 1-48).
Support the lower arm . Remove the mounting nuts,
bolts and shock absorber.
INSPECTION
Check the pivot bushings for wear or damage.
Check the damper unit for leaks or other damage.
Replace the shock absorber assembly if necessary.
INSTALLATION
Insert the bolts
Install the shock absorber with the mounting bolts
"""""'==c::c=-
from the rear
side and new nuts, and tighten them.
TORQUE : 59 N'm (6.0 kgf-m , 44 Ibf.ft)
17-16
BOLT(12x65mm)
~A i iN i iiD i ii N iUi T
111