Rear Wheel Hub/Knuckle Installation - Honda MUV700 big red Service Manual

REAR WHEEl/SUSPENSION
INSTALLATION
Install the mner seal
Coat the lips of new inner and outer dust seals wi th
'ITsr,
then Ins /all the
grease
and install each dust seal until it
is
flush with
ourer se~1
the knuckle, being careful not to damage the lip.
17-8
TOOLS:
Driver
Oil seal driver attachment
Driver attachment
07749-0010000
07947-6340201 or
07AMO-HllAl00
(U.S.A . only)
Apply molybdenum disulfide grease to the sl iding
surfaces of the lower bush i ngs and install them into
the knuckle until they afe fully seated.
Install new dust seals wi th the lip side facing ou t
until the depth from the bushing end is 0.5 mm.
Apply molybdenum disulfide grease to the sliding
surfaces of the pivot collar and install
it.
Apply 2.5 - 3 9 of molybdenum disulfide grease to
the lip of each dust seal and install the seal caps
over the dust seals securely.
BUSHINGS
SEAL CAPS
. - 3
g)
O.5mm O.5mm