Honda MUV700 big red Service Manual page 503

Release the retaining straps and open the front'
hood .
Do not loosen the
Loosen the selector lever side cable nuts (both
gear case side lad:
lower and upper) on each differential lock cable
nuts.
thoroughly.
Operate the differential lock ar m on each differential
by your hand and set it to the lock free position.
Tum the Ignition -
front differential lock arm: upper side
switd! to ON
(I)
and -
rear differential lock arm: front side
check that the all
differential lock
indicator does not
come on {this
mdicator
IS
detected the only
the front dlfferenual
lock}.
Do
not move the
Screw the cable nuts on each differential lock cable
selector lever from
together gradually (to move both nuts to the cable
the 2WD position.
holder side) by your hands so that the cable does
not forced until they are touched to the cable
holder.
Tighten the cable nut while holding the other nut.
TORQUE: 26 N·m (2.7 kgf·m, 20 Ibf ·ft )
FRONT ORIVING MECHANISM
19-45