Table of Contents
Advertisement
FUEL SYSTEM (PGM-FI)
INTAKE AIR DUCT
REMOVALIINSTALLA TION
Remove the air cleaner housing {page 6-41
J,
Release the fuel feed hose clip on the fuel tank.
Remove the hose clips from the air duct.
Remove the duct cap by releasing
it
from the two
tabs.
Remove the intake air duct.
When Iflsraliing the
Installation is
in
the reverse order of removal.
duct cap. align the
index
lines.
•
-.
CLIPS
ACCELERATOR PEDAL
REMOVAL/INSTALLA TION
\
CAP
•
Release the
cable
retainer (Yellow) by pulling
it
to
, - - - - - -
-- - - - - - - - - - - ,
the right side to disconnect the inner cable from the
BOLT
pedal.
Remove the bolt to disconnect the outer cable from
the
bracket.
Remove the two bolt and accelerator pedal assem-
bly.
Installation is in the reverse order of removal.
8
'\
PEDAL
6·42
Advertisement
Table of Contents
Troubleshooting
