Honda MUV700 big red Service Manual page 318

DRIVETRAIN SYSTEM
Connect a 12 V battery to the solenoid valve connec-
tor terminals as shown.
The shift solenoid valve should operate (sound)
when the battery is connected.
OIL PRESSURE CHECK
NOTE .
• If the oil pressure is abnormal, inspect and clean
the parts according to the hydraulic circuit trou-
bleshooting chart (page 14-10) .
• Failure to warm the engine will cause very high
oil pressure readings and oi l leaks will cause low
oil pressure reading s.
Check the oil level and add the recommended
engine oil
if
necessa ry (page 4-12).
Warm the engine to normal operating temperature
and check for external oil leaks.
LINE OIL PRESSURE
Remove the engine front cover (page 3-6).
Clean around the sealing bolt with compressed air.
8e sure thar no dirt Remove the sealing boll and washer from Ihe right
IS
allowed
to
enter
side of the shift valve body.
tile
01/
gallery.
14-8
SHIFTSOLENOID
VALVE A
CONNECTOR
SHIFTSOLENOIQ
VALVE 8
CONNECTOR
EB 8
12V BATTERY
EB 8
12 V
BATTERY
(Terminal side of the solenoid valve)