Honda MUV700 big red Service Manual page 194

FUEL SYSTEM (PGM-FI)
6-50
Remove the injector jOint and seal ring from the
injector.
Install a new seal ring onlo a new injector.
Apply engine oil to the seal ring and Q·ring on the
injector.
Install the injector joint onto the injector being care-
ful not to damage the a ·r ing.
Install the fuel injector assembly into the throttle
body being careful not to damage the seal ring.
Install the injector mounting bolts and tighten them.
Connect the fu el injector 2P gray connector.
Connect the quick connect fitting to the fuel injector
(page 6·33).