Lighting/Dimmer Switch Inspection; Lighting/Dimmer Switch Replacement - Honda MUV700 big red Service Manual

LIGHTS/METERS/SWITCHES
LIGHTING/DIMMER SWITCH
INSPECTION
Open the front hood.
Release the wire band and disconnect the lighting!
dimmer switch 4P green connector.
Check for continuity between the switch side con-
nector terminals in each switch position.
Continuity should exist between the color coded
wi res as shown below:
~
BI/Br Bu/BI
W
B.
Position
OFF
.0
(
-()- --0
(N)
(
--{
!D
0-
--f).
-<
REPLACEMENT
Disconnect the lighting/dimmer switch 4P green , - - - - - - - - - - - -- - - - - - - ,
24-8
connector (page 24-8).
Remove the screw and switch holder.
Remove the lighting/dimmer switch from the instru-
ment panel by pushing in the two stoppers.
Install a new lighting/dimmer switch into the instru-
ment panel by aligning the lug with the groove.
Install the switch holder and tighten the screw.
Connect the lighting/dimmer switch 4P green con-
nector and secu re the wires with the wire band on
the indicator cover.
Close the front hood.
Align
SCREW
STOPPERS
I
SWITCH
HOLDER
LIG HTING/DIMM ER SWITCH