Honda MUV700 big red Service Manual page 350

DRIVETRAIN SYSTEM
Install the following:
- sealing bolts with new washers
- dip stick
- oil filter (page 4-14)
Apply engine oil to the lips of a new oil seal, and
install it into the crankcase cover until it is fully
seated.
Coat new O-rings with engine oil and instal l them
onlo the joint pipes.
Inslallthe joint pipes into the oil pump.
SEALING BOLTS, WASHERS
Apply liquid sealant (Three Bond 1215 or equiva-
~=~IIIIIIIIIIII'===-
___
-=::::::=~IIIIIIIIIIII~
lent) to the mating su rface of the front crankcase
cover as shown.
14-40