Honda MUV700 big red Service Manual page 401

loosen the two bracket bolts (10 mm) and remove
the lower mounting nut and bolt (12 mmJ.
Remove the bracket bolts and mounting bracket.
Support the gear case with wooden blocks and
remove the upper mounting nul and bolt (12 mm).
Move the gear case assembly forward for maximum
clearance between the propeller shaft joint and
engine.
Pull the shaft joint out of the output shaft of the
engine.
Remove the O-ring.
Remove the pinch bolt and lock washer on the
lower side of the steering shaft.
STEERING SYSTEM
BRACKET
16-11