Solenoid And Emergency Valves - Honda MUV700 big red Service Manual

DRIVETRAIN SYSTEM
Install the four boils and tighten them securely.
BOLTS
SOLENOID AND EMERGENCY VALV ES
Coat a new O-ring with engine oil and install
it
into
,----------;; S~ C~R~E~ W ::---,- L ~ O~ C~ K ~P = L - A ~ T=E : -,
the stopper bolt groove.
Apply engine oil to the emergency valve. STOPPER BOLT
Install the spring and emergency valve inlO the
AfT
clutch PC solenoid valve body with the concave end
of the valve facing in.
Install the valve stopper bolt and turn it in until the
groove edge is aligned with the valve body surface.
Secure the stopper bolt with the lock plate as shown
and tighten the screw.
O·RING
II!
SPRING - - -
"~
~ ,
-"1
EMERGENCY VALVE
~
Coat a new rubber seal with engine oil and install
it
~Aff ==C=L=U:T:C:H= P=C======:;:====~
into the
groove in the AfT clu tch
PC solenoid valve SOLENOID VALVE
body.
Install the
AfT
clutch PC solenoid valve assembly \
and four bolts onto the solenoid valve body, and
lighten the bolts.
Coat new O-rings with engine oit and install them
into the grooves in each shift solenoid valves.
Do nor mrerchange
Install shift solenoid valves A and B into the sole-
valves
A
and B
noid valve body.
SHIFT SOLENOID
VALVE
B
"/II
RUBBER
~
Iii
SEAL ........
SHIFT SOLENOID
VALVE A
14-35