Honda MUV700 big red Service Manual page 237

Set the piston position to Top Dead Center on the
compression stroke (page 4-10).
Remove the following:
- spark plug cap
- seven bolts and three washers
- four cap nuts and washers
- cvlinder head cover
puSh rods
gasket
Marl< the push rods -
so they
C<ln
be
placed back
In
rhell
onglna/locatlons
- dowel pins
- cam followers
DISASSEMBLY
Remove the two bolts and sealing washers.
Push the rocker arm shaft with the small screw-
driver through the bolt hole until the O-ring on the
shaft is removed out of the head cover.
CYLINDER HEADIV ALVE/CAMSHAFT
1..:.:.::';:;: AND WASHERS _ _ ,;, H ;,; E o A;D COVER
ROCKER ARM SHAFTS
9-7