Honda MUV700 big red Service Manual page 479

While holding the
shift fork, push the
arm shaft to slide
It
Inward and install
rhe shaft end into
the Pivot hole in the
housing.
Install the shift fork and align the groove with the
lock spring end.
Install the stopper plate by aligning the flat surfaces
so the plate is attached onto the fork l ug.
Install the clutch spring with the bended end toward
the shift fork.
FRONT DRIVING MECHANISM
Turn the arm shaft clockwise by holding the collar
r---------------------
with
a open
end w rench and align the arm tab with
the collar groove, then tap the shaft to fit them
securely.
Align the bolt hole in the fork with the groove in the
shaft and install a new fork bo lt .
Tighten the fork bolt.
TORQUE: 10 N'm (1 .0 kgf·m, 7 Ibf.ft)
ARM SHAFT
19-21