Engine Removal; Oil Cooler - Honda MUV700 big red Service Manual

ENGINE REMOVAL/INSTALLATION
ENGINE REMOVAL
8-4
Drain the engine oil (page 4-13),
Drain the coolant (page 7-6).
Drain the differential oi l from the rear final gear case
(page 4-17).
Remove the following:
- front bumper (page 3-16)
- oil cooler (page 5-13)
- exhaust system (page 3-25)
- ca rgo bed (page 3-17)
- throttle body (page 6·45)
Disconnect the negative H cable from the battery
(page 21-6).
Remove the following from the engine:
EeT
sensor
2P
(black) connector
- spark plug cap
- wire band (from the cable holder)
- EOT sensor 2P (black) connect or
- EDT sensor and sealing washer
- oil fille r hose (from the oil pipe)
- two bolts and cable holder
- pinch bolt and gear selector am
- bolt and ground cable