Front Propeller Shaft Assembly - Honda MUV700 big red Service Manual

FRONT DRIVING MECHANISM
ASSEMBLY
~
SEAL LIP
PROPElLER
SHAFT
Place the inner boot bands on the propeller
shatto
Do
not allow the
Apply molybdenum disulfide grease to the seal lip
sea/lip to rum
of each boot.
outside m Install the boots onto the shaft grooves, being care-
ful not to damage the seal lip.
19-16
Install the inner boot bands into the each boot
groove.
Install the joint spring into the propeller shaft
securely.
Apply 5 - 8 9 of molybdenum disulfide grease to the
propeller shaft joint splines.
Set the shaft joint onto the propeller shaft while
compressing the spring, then install the boot over
the shaft joint groove and the outer boot band into
the boot groove to secure
it.
~
SEAL LIP
SPLINES
~
15-89)
BOOT ~
J
BANDS
PROPELLER
SHAFT JOINT
SPRING
.1,
~ BOOT
~ 15-89)
SHAFT J OINT