Engine Removal/Installation Service Information - Honda MUV700 big red Service Manual

ENGINE REMOVAL/INSTALLATION
SERVICE INFORMATION
GENERAL
• When removing/installing the engine, tape the frame around the engine and fina l gear case, and cover the body panels
beforehand for frame and plastic components protection .
• The following components require engine removal for service:
- mainshah and 2nd/3rd shift clutch (countershaft) (page 14·47)
- crankshaft/balancer (page 13-2)
SPCIFICATIONS
ITEM
I
Engine dry weight
SPECIFICATIONS
60. t kg (132.5Ibs)
Engine oil capacity
~ fter
draining
[
2.7 liters (2.9 US qt, 2.4 Imp qt) _ __ _
After draining/filter
I
r-*an
g
e - - 1
2.9 liters (3.1 US
qt,
2.6 Imp qt)
h
After disassembly
-----+
I
Coolant capacity (ra diator and engine)
!
4.1 titers (4.3 US qt, 3.6 Imp qt)
3.3 liters (3.5
~2.9
Irnpqt)
TORQUE VALUES
lower engine hanger nut (left and right)
Upper engine hanger nut
Upper engine hanger bolt
Front final gear case mounting nut (12 mm)
Rear final gear case mounting nut (12 mm)
Gear selector arm pinch bolt
EOT sensor
54 N'm (5.5 kgf·m, 40 Ibf.ft)
54 N·m (5.5 kgf·m, 40 Ibf·h)
32 N·m (3.3 kgf·m, 24 Ibf·h)
54 N'm (5.5 kgf·m, 40 Ibf·h) Lock nut: replace with a new one.
54 N·m (5.5 kgf·m, 40 Ibf·h) Lock nut: replace with a new one.
16 N·m (1.6 kgf·m, 12Ibf.ft)
12
N'm
(1.2
kgf.m, 9Ibf-ft)
8-3