Dtc 16-1 (Shift Solenoid Valve B-Short) - Honda MUV700 big red Service Manual

3. Shift Solenoid Valve A line Open Circuit
Inspection
Connect the shift solenoid valve A 2P black con-
nector.
Disconnect the peM 33P black connector.
Measure the resistance between the wire har-
ness side peM 33P black connector terminals.
TOOL:
Test probe. 2 pack 07ZAJ· ROJA1'O
Connection:
Yellow/ black (A2) - Green /white (A13)
Is the
rBsistance
within 14.6 - 16.2
n
(20OC/
68"F}7
YES - GO TO STEP 4.
NO - . Open circuit in the Yellow/black wire .
• Open ci rcuit in the Green/white wire.
4. Failure Reproduction
Connect the shift solenoid valve A 2P black con-
nector and peM 33P black connector.
Erase the DTC (page 6-13).
Test-drive the vehicle and slop the engine.
Recheck the OTC with the HDS pocket tester.
Is OTC
15-2
indicated?
YES - Replace the PCM with a new one and
recheck.
NO - Inter mittent failure.
DTe 16-1 (SHIFT SOLENOID VALVE B-
SHORT)
1. Recheck OTe
Test-drive the vehicle and stop the engine.
Recheck the current DTC with the HDS pocket
tester.
Is DTC 16-1 indicated?
YES - GO TO STEP 2.
NO - Inter mittent failure.
2. Shift Solenoid Valve B Inspection
Turn the ignition switch to OFF {O J.
Disconnect the shift solenoid valve B 2P brown
connector.
Measure the resistance between the solenoid
valve side 2P connector terminals.
Is the resistance within 14.6 - 16.2 {] (20<>(;1
68"Fjl
YES - GO TO STEP 3.
NO - Faulty shift solenoid valve "B".
DRIVETRAIN SYSTEM
Yellow/bl"k ~
~ :n Q
,
"~
Green/white (AI3)
PCM 33P BLACK CONNECTOR
(Terminal side of the wire harness)
SH IFT SOLENOID VALVE B 2P CONNECTOR
(Terminal side of the solenoid valve)
J l
Ii'=:
Q
14-21