Alternator/Starter Clutch Service Information; Alternator/Starter Clutch Specification; Alternator/Starter Clutch Torque Values; Alternator/Starter Clutch Tools - Honda MUV700 big red Service Manual

AL TERNATORISTARTER CLUTCH
SERVICE INFORMATION
GENERAL
• This section covers service of the alternator stator and flywheel/starter clutch. These parts can be serviced with the
engine installed in the frame.
• Crankshaft lubricating oil is fed through the oil passage in the alternator caver. Clean the oil passage before installing
the alternator cover.
• Be careful not to damage the mating surfaces of the alternator and crankcase covers when servicing.
• For rear crankcase cover removal/insta l lation, see Sub-transmission/Gearshift linkage section (page 12-5).
• For alternator stator inspection, see Battery/Charging System section (page 21-8).
• For starter motor service, see Electric Starter section (page 23-6).
SPECIFICATION
Unit' mm (in)
ITEM
STANDARD S ERVICE LIMIT
r---sta rter driven gear boss 0.0. 51.705
51.718 (2.0356 2.0361 ) 51.6t (2.032)
Torque limiter slip torque
53 84 N'm (5.4 8.6 kgf.m,
39 - 62 Ibf·ft)
TORQUE VALUES
30 N·m (3. 1 kgf.m, 22 Ibf·ft) Apply locking agent to the threads. Starter clutch socket bolt
Flywheel bolt
Alternator slator boll
CKP sensor bolt
108 N'm (11.0 kgf·m, 80 lbf·ft) Apply engine oil to the threads and seating surface.
10 N·m (1.0 kgf.m, 7 Ibf·ft)
Gear selector arm pinch bolt
6 N·m (0.6 kgf·m, 4.3 Ibf·ft) Apply locking agent to the threads.
16 N'm (1.6 kgf·m, 12 lbf·ft) Apply locking agent to the threads.
TOOLS
Flywheel holder
07725·0040001
or equivalent commercially
available in U.S.A.
Bearing remover shaft, 10 mm
07936-GE00100
or 07936-GEOAOOO (U.S.A. only)
Rotor puller
07733-0020001
or 07933-3950000 (U.S.A. only)
Bearing remover head, 10 mm
07936-GE00200
or 07936-GEOAOOO (U.S.A. only)
Remover weight
07741-0010201
or 07936-371020A or 07936·3710200
(U.S.A. only)
Remover handle
07936-3710100
11-3