Honda MUV700 big red Service Manual page 484

FRONT DRIVING MECHANISM
19-26
Hook the fork side spri ng end o nto the underside of
the spring pin on the stopper arm , using a screw-
driver.
Slide the shift fork and set its spring pin between
the spring ends.
Align the bolt hole in the fork with the groove in the
shaft and inst all a new fork bol t.
Tighten the fork bolt.
TORQUE : 10 N'm !1 .0 kgf·m, 7 Ibf.ft)
Install a new oil seal so that
it
is flush with the hous-
ing end, being careful not to damage the lip.
TOOLS:
Driver
Oil seal driver attachment
07749·0010000
07JAO·PH80101
Pack the seal lips of the oil seal with grease.
~
BOLT
....