Honda MUV700 big red Service Manual page 191

Tighten the insulator band screw so that the dis-
tance between the band tabs is as shown .
FUEL SYSTEM IPGM-FI)
5.5 ±
1 mm
(0.22
±
0.04 in)
Align the end of the insulator band with the stopper
~;;;;;_u.;:::=,:::;=,:::;;:;===========~
of the insulator.
Install the throttle body into the insulator by align-
ing the lug with the groove.
Tighten the insulator band screw so that the dis-
tance between the band tabs is as shown.
Connect the throttle cable end to the throttle drum.
Install the throttle cable adjuster into the throttle
body and temporarily tighten the lock nut.
Adjust the accelerator pedal freeplay (page 4-5).
Install the throttle drum cover by aligning the locat-
ing tab with the slot in the throttle body.
Install and tighten the screw.
~
(
LOCATING TAB
SCREW/WA$HER
THROTILE DRUM COVER
6-47