Door Panel; Door Hinge; Door Handle And Latch - Honda MUV700 big red Service Manual

DOOR
DOOR PANEL
Open the door.
Support the bottom of the door panel.
Remove the fou r cap nuts and socket bolts,
and the door panel.
CIOSB8nd lalell the
Installation is in the reverse order of removal .
door
before
tlghfemng the nuts
TORQUE: 26 N'm 12.7
kg'·m,
19lbf·ft J
After installation, make sure the door latches
securely without requiring excessive force
and opens smoothlv. If necessary, loosen the
cap nuts and adjust the door panel position.
DOOR HINGE
Remove the door panel (page 3-9).
Remove the following:
- two socket boils and washers
- door hinge
- two socket bo lts
- hinge bracket
Installation is in the reverse order of removal.
TORQUE: 26 N ·m 12.7 kgf·m . 19 Ibf.ft )
DOOR HANDLE AND LATCH
Remove the following:
- four screws (6 x 13 mm)
- latch cover
- two bolts
- latch assembly
FRAME/BODY PANELS/EXHAUST SYSTEM
BOLTS
BOLTS AND
WASHER S
NUTS
\
4
' HINGE ,
:
. J ~t
,I
BOL~~
~
I~
,
, 1
~,'
LATCH
............... ASSEMBLY
SCREWS
3-9