Honda MUV700 big red Service Manual page 426

REAR WHEEL/SUSPENSION
The stabilizer links have the identification paint:
Left link: Yellow
Right fink: White
Install the stabilizer links with new nuts and tighten
them while holding the stud bolt end.
TORQUE: 46 N·m (4.7 kgf·m, 34 Ibf.ft)
UPPER ARM
Insert the frame
Install the upper arm into the frame with the pivot
~~':"
sIde Pivo t bolts
bolts and new nuts while inserting the stabilizer link
from the outside
of into the upper arm.
Ihearm.
Insert the knuckle
Side Pivot bolt from
the rear Side
17-14
Connect the upper arm to the knuckle with the pivot
bolt and a new nut.
Before installing the shock absorber, tighten the
pivot fasteners
with
both the upper and lower arms
installed (page 17-15),
Install a new stabilizer link nut and tighten
it
while
holding the stud bolt end.
TORQUE: 46 N·m (4.7 kgf·m . 34
Ibf.ftl
Install the brake hose clamp with a new bolt and
tighten it.
TORQUE: 12 N·m (1.2 kgf·m, 9Ibf.ft)