Rear Wheel/Suspension Service Information; Rear Wheel/Suspension Specifications; Rear Wheel/Suspension Torque Values; Rear Wheel/Suspension Tools - Honda MUV700 big red Service Manual

SERVICE INFORMATION
GENERAL
REAR WHEEL/SUSPENSION
• A contaminated brake disc or pad reduces slopping power. Discard contaminated pads and clean a contaminated disc
with
a
high quality brake degreasing agent.
• A jack or other support is required to support the vehicle (page 1-48).
• Do nol twist or bend the brake hose and pipe when serving.
• Use Honda Genuine replacement bolts and nuts for all suspension pivots and mounting points.
• For tire information, see Front Wheel/Suspension section (page' 5-6).
• For brake system service, see Brake System section (page 18-2).
SPECIFICATIONS
ITEM
Minimum tire tread depth
STANDARD ------------·S~ E ~ R V ~ I~C< E T ln, M
..
,T ~
4 mm (0.2 in)
Cold tire pressu re Standard _ _
-+~70:c;:'~P=_a:
(0.70 kgf/cm2, 10.0 psi)
'--________________ '---W=;t " h-' c "a"'9,,o'---_ _____
-'--,, 70 __ ' ' '' Pa (0.70
kgf/cm2,
10.0 P " 's"O'---_ _ _ "-_ _ _ _ _
--l
TORQUE VALUES
Wheel nut
Wheel hub nut
Brake disc bolt
Brake disc splash guard socket bolt
Shock absorber mounting nut
Brake hose clamp bolt
Upper arm pivot nut
lower arm pivot nut (frame side)
lower arm pivot nut (knuckle side)
Stabilizer arm mounting bolt
Stabilizer link nut
Rear brake caliper mounting bolt
TOOLS
Driver
07749-0010000
108 N'm (11.0 kgf·m, 80 Ibf·h)
137 N·m (14.0 kgf·m, 101 Ibf·h)
42 N'm (4.3 kgf·m, 31 Ibf.ft)
11 N'm ( 1.1 kgf·m, B Ibf.ft)
59 N'm (6.0 kgf·m, 44 Ibf.ft)
12 N'm (1.2 kgf·m,9 Ibf.ft)
64 N'm (6.5 kgf·m, 47 Ibf.ft)
64 N'm (6.5 kgf·m, 47 Ibf.ft)
44 N·m (4.5 kgf·m, 33 Ibf.ft)
27 N'm (2.B kgf·m, 20 Ibf·ft)
46 N'm (4.7 kgf·m, 34lbf·ft)
49 N-m (5.0 kgf·m. 36 Ibf.ft)
Attachment, 62 x 64 mm
07947-6340400
Castle nut: tighten to the specified torque and fur-
ther tighten until its grooves aligns with the coner
pin hole.
AlOC bolt: replace with a new one.
AlOC bolt: replace with a new one.
lock nut: replace with a new one.
AlOC bolt: replace with 8 new one.
lock nut: replace with 8 new one.
lock nut: replace with a new one.
lock nut: replace with 8 new one.
ALOe bolt: replace with 8 new one.
Lock nut : replace with a new one.
ALOC bolt: replace with a new one.
Oil seal driver attachment
07947·6340201
or 07AMD-HL lA 100 (U.S.A. only) or 07AMD-HL lA 100 (U.S.A. only)
17-3