Table of Contents
Advertisement
INSTALLATION
Instat! a new O-ring onto the IACV
.
Turn the slide valve clockwise until lightly seated on
the IACV body.
Install the IACV into the throttle body by aligning
the valve slit with the guide pin in
the
throttle body.
Install
the retainer plate with the two tone screws by
aligning the groove with the valve
boss.
Connect the IACV 4P
black
connector.
Install the center frame cover
(page 3-7).
FUEL INJECTOR
REPLACEMENT
Relieve the fuel pressure (page 6-31
1,
Disconnect the quick connect fitting from the fuel
injector (page
6-31),
Clean around
the
fuel injector base with com-
pressed air before removing the
fuel
injector,
and
be sure that no debris is allowed t
o
enter into the
combustion
chamber.
Disconnect the fuel injector 2P
gray
connect
o r.
Remove the two mounting bolts and the
fue
l
injec~
tor assembly from the throttle
body.
FUEL SYSTEM (PGM -FI)
6-49
Advertisement
Table of Contents
Troubleshooting
