Starter Motor Installation - Honda MUV700 big red Service Manual

Install new sea l rings onto the motor case.
Install the front cover onto the armature shaft and
motor case.
Install the rear cover assembly onto the motor case
by aligning the lug and the groove (index lines).
Align the bolt holes in the front and rear covers by
aligning the index lines on the front cover and
motor case.
Install new O-rings onto the motor case boils.
Install the bolts and tighten them.
INSTALLATION
Coat a new O-ring with oil and install it in the starter
m otor g roove.
Install t he starter motor into the rear cr ankcase
cover and onto the crankcase.
ELECTRIC STARTER
$"
SEAL
ARMATURE
REAR COVER ASSEMBLY
INDEX LINES
II
O-RING
5"
O-RING
23-11