Ignition Switch Inspection; Ignition Switch Replacement - Honda MUV700 big red Service Manual

Install a new accessory socket by aligning the lug
with the groove in the center frame cover.
Install the nut and tighten it securely.
Connect the 2P black connector to th e accessory
socket.
Install the center frame cover (page 3-7).
IGNITION SWITCH
INSPECTION
Open the front food.
Disconnect the ignition switch 5P black connector.
Check for continuity between the switch side con -
nector terminals in each switch position.
Continuity should exist between the color coded
wires as follows:
I~
RIBI
.,
A AIW VIA
Positien
ST(l1l
}-- C--<
)--
r-o-
t-O
ON (I) }--
t-<
)-- f-O
OFF (e )
REPLACEMENT
LIGHTS/METERS/SWITCHES
Disconnect the ignition switch 5P black connecto r , - - - -- - - -- - - - - - - - - - -
(page 24-7 ). IGN ITION SWITCH NUT
Remove the ignition switch nut and ignition switch
from the instrument panel.
Install a new ignition switch into the instrument
panel by aligning the flat surfaces.
Install the ignition switch nut and tighten it.
TORQUE: 4.9 N 'm (0.50 kgf·m, 3.6 Ibf-tt)
Connect the ignition switch 5P black connector.
Close the front hood.
IGNITION SWITCH
, 0
Align
24-7