Honda MUV700 big red Service Manual page 295

SUB-TRANSMISSION/GEARSHIFT LINKAGE
Release the retaining straps and open the front
hood.
Completely loosen the upper and lower cable nuts
on the selector cable.
Unlock the cargo bed by pulling the release lever
and raise the bed.
Turn the
Ignition
Operate the select or arm on the feaf side
of
the
SWitch to ON
(I)
and
engine by hand and shift the sub-transmissi on into
check that the
neutral (the selector arm will be vertical),
neutral mdlcator
comes on at this
r,me
Do not move the Without applying force to move the cables, gradu-
selector lever from
ally screw the cable nut s together by hand until they
the neutral position
touch the cable holder.
Tighten the cable nut while holding the other nut.
TORQUE: 26 N·m (2.7 kgf-m, 20 Ibf.ft)
Make sure the gear selector lever free play is as indi-
cated when in the neutral (N ) position .
After adjustment, check that the selector lever oper-
ates properly.
Lower the cargo bed.
Close the front hood and secure it with the straps.
SELECTOR
LEVER
GATE
Morethan
I
~;;:~th' _ n
_____ _
12-17