Engine Installation - Honda MUV700 big red Service Manual

Check the mounting rubbers, bushings and dust
seals for deter ioration, wea r or damage,
ENGINE INSTALLATION
NOTE
• Route the wires, cables and hoses proper ly (page
1-21 ).
Install the lower mounting bushings into the engine
lower mounts.
Install the dust seals with the lip side facing out.
Hold rhe engme
Temporarily place the engine on the floor from the
securely and be left side, then place the engine into the frame and
careful nollO
support it in position with suitable wooded blocks.
damage
Ihe
frame
end engine
NOTICE
Do not hold
or
s/rike the solenoid valves on the shih
valve body during engine removal. Holding the
solenoid valve or excessive shock may damage the
solenoid valvB.
Install the mounting rubbers onto the lower mount-
ing bushing with the large I.D. side facing in.
Take care not 10 let
Install the hange r bracket and bolts, and the hanger
the
mounting bolt (from the front side ) while aligning the boll
rubbers come off holes carefully.
the bushmg durmg
mSlallatlO(l,
Loosely install the hanger nut.
Install the other side mounting fasteners in the
same manner as above.
ENGINE REMOVAL/INSTALLATION
BUSHING
BUSHING
Front
Front _
(Left side shown )
8-9