Honda MUV700 big red Service Manual page 228

ENGINE REMOVAL/INSTALLATION
Connect the alternator/CKP sensor SP (black) and
gear position swit ch 3P (black) connectors, and
secure their wires with the wire band on the frame.
Connect the solenoid valve 6P (green) connector.
3P CONNECTOR
;,-;:;:
6P CONNECTOR ;
';:<
5P CONNECTOR
Connect the grou nd cable to the engine with the
.iiiiiiiii.~~!iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii.
bolt and tighten it.
8-14
Install the gear selector arm by aligning the slit with
the index line of the spindle. Install the pinch bolt
and tighten il.
TORQUE: 16 N-m (1 .6 kgf·m , 12 Ibf·ftl
Secure the selector cable onto the engine with the
two cable holder bolts and tighten them.
Connect the oil filler hose.