Front Final Clutch Disassembly/Inspection - Honda MUV700 big red Service Manual

FRONT DRIVING MECHANISM
FRONT FINAL CLUTCH
DISASSEMBLY IINSPECTION
The housing
is Remove the following:
under spong -
4WD select switch and sealing washer
pressure, hold the
three bolts
housing when
final clutch housing (by releasing the sh ift fork
loosenmg the bolt
from the sleeve) HOUSING
clutch sleeve
D-ring
dowel pins
Check the splines of the pinion joint, clutch sleeve
and pinion gear shaft for wear or damage.
Check the needle bearing i n the pinion gear shaft for
wear or damage.
Release the clutch spring end from the stopper plate
by pulling the arm shaft.
Remove the fork bolt.
Pry the clutch arm tab to release it from the collar
and slide the shaft outward.
DO>VELPINS
ARM SHAFT
19-17