Installing A New Message Networking System - Avaya S3210R Manual

Getting Started
Home > Installing a new Message Networking system

Installing a new Message Networking system

This topic provides information on installing a new Message Networking system.
See Performing software managment
Message Networking system.
For a first-time installation, perform the listed tasks in order. The
to the applicable procedures.
Preinstallation requirements
!
Unpacking the system
!
Identifying the server and components
!
Installing the system hardware
!
Powering up the system
!
Logging into the system from the console
!
Setting the time and date
!
Installing additional language software
!
Installing the switch connection software
!
Checking the system status
!
Configuring the modem/terminal
!
Setting up network addressing
!
Rebooting the system
!
Performing initial system administration
!
Performing acceptance tests
!
Registering the Message Networking system
!
Note: If you intend to use the attended high-availability option supported by Message Networking for disaster
recovery, you must install the secondary Message Networking system. See
overview for information.
Top of page
Message Networking Help
Admin
for information on upgrading, adding, or removing software on an existing
(if needed)
(required for analog systems)
Print
Maintenance
System installation checklist
Attended high-availability option
Home | Search
| Back | Fwd | Close
Reference
also provides links
3