Configuring The Oai Box; Configuring Network Parameters - Avaya Communication Server 1000 Installation And Commissioning Manual

Configuring the OAI Box

Follow the steps in
page 195 to configure the system type.
Configure the system type from the OAI Box Configuration option
1. From the NetLink OAI System screen, select OAI Box Configuration.
2. Enter the configuration information for the WLAN Application Gateway 2246
3. Press Esc on the keyboard to return to the NetLink OAI System screen.

Configuring network parameters

Follow the steps in
including IP address.
Configuring the network
1. From the NetLink OAI System screen, select Network Configuration.
2. Enter the configuration information for the WLAN Application Gateway 2246, as
Avaya WLAN IP Telephony Installation and Commissioning
Configure the system type from the OAI Box Configuration option
This option does not appear unless Use NetLink GW with mogX00 is configured to
Yes, which is the default.
(provided by the network administrator).
• Use NetLink GW with mogX00—change this option to No.
• TFTP Download Master—enter the IP address of the TFTP Server.
• Maintenance Lock—the system sets this option to Yes after maintenance
activities are performed that require a reset. This option cannot be changed.
It is automatically set. Reset the system at exit to clear Maintenance Lock.
Maintenance Lock prevents any new calls from starting.
• Reset System—if this option is set to Yes, the WLAN Application Gateway
2246 is reset after pressing ENTER.
• Reset All Systems—not applicable.
Configuring the network
provided by the network administrator.
• Ethernet Address—this is the MAC address of the WLAN Application
Gateway 2246. This address is set at the factory.
• IP Address—enter the complete IP address for the WLAN Application
Gateway 2246, including digits and periods. Do not use DHCP. The IP address
can be changed after initial configuration.
• Hostname—the default host name can be changed. This is the name of the
WLAN Application Gateway 2246 to which connection is made. This name is
for identification purposes only. Spaces cannot be entered in this field.
on page 195 to configure network parameters,
Configuration
on
November 2010 195