Configuring The Network - Avaya S6200 Manual

3. Select Menu > Edit > Preferences. The system displays the Preferences dialog.
4. Edit the BootP settings on your system to match the BootP settings shown.
5. Edit the TFTP server settings by entering the IP address of the laptop and the directory
location of the gateway server files. BootP will automatically populate the Boot File Mask
and Ini file mask settings of the directory.
Tip:
Store only one set of configuration files, one cmp file and one ini file, in the
Tip:
directory so that bootP chooses the correct file.
6. Click Ok to save the changes.

Configuring the network

Once the BootP Application is installed you can use it to configure the AudioCodes gateway
board for the network parameters that will make it accessible through the Web GUI on the site's
network. The Web-based GUI enables further configurations on the gateway board.
Tip:
Although the BootP application can be used to configure other parameters, only
Tip:
use it to configure the gateway network parameters when used with the S6x00
server.
Configuring the Gateway
Issue 1 July 2006 53