Switch - Motorola RFS7000 Reference Manual

5.1.36 switch

Global Configuration Commands
Configures the switch's geographical location parameters
Supported in the Following Platforms:
• RFS6000
Syntax
switch [coordinates|geo-coordinates]
switch (coordinates) (x) <0-65535> (y)<0-65535> (z) <0-65535>
switch (geo-coordinates)(longitude)<-180.00-180.00>
Parameters
coordinates
geo-coordinates
Example
RFSwitch(config)#switch coordinates x 121 y 121 z 135
RFSwitch(config)#
RFSwitch(config)#switch geo-coordinates longitude 120 latitude 70
RFSwitch(config)#
SWITCH NOTE: This command is not supported with:
• WS5100
• RFS7000
(latitude) <-90.00-90.00>
Configures switch coordinates within the site
• x <0-65535> – Configures X coordinate
• y <0-65535> – Configures Y coordinate
• z <0-65535> – Configures Z coordinate
Configures switch geometrical coordinates
• longitude <-180.00-180.00> – Configures longitude, in
degrees, for switch
• latitude <-90.00-90.00> – Configures latitude, in
degrees, for switch
Global Configuration Commands 5-87