2-52
WS5100 Series Switch CLI Reference Guide
2.2.22 redundancy-members
Common to all modes
Displays the member switches in the cluster. The user can provide the
switch in cluster whose information alone is needed.
Syntax
show redundancy-members (A.B.C.D)
Parameters
A.B.C.D
Example
WS5100(config)#show redundancy-members brief
Member ID (Self)
Member State
Member ID
Member State
2.2.23 snmp
Common to all modes
Syntax
show snmp [user(snmpmanager|snmpoperator|snmptrap)]
Parameters
user
snmpmanager
snmpoperator
snmptrap
Displays the IP addresses of member switches
: 10.10.10.10
: Not Applicable
: 10.10.10.1
: Peer Configured
Displays SNMP user information
Shows SNMP manager information
Shows SNMP operator information
Shows SNMP trap information
of the
IP address