Editing A Snmp V3 Authentication And Privacy Password; Accessing Snmp V2/V3 Statistics - Motorola RFS7000 Series System Reference Manual

7.3.2.1 Editing a SNMP v3 Authentication and Privacy Password

The Edit screen enables the user to modify the password required to change the authentication keys. Updating
the password requires logging off of the system. Updating the existing password creates new authentication
and encryption keys. To edit an SNMP v3 user profile:
1. Select Management Access > SNMP Access
2. Select the v3 tab from within the SNMP Access screen.
3. Highlight an existing SNMP v3 User Name and click the
The Authentication Protocol
Protocol is not an editable option. The
The Privacy Protocol is also not an editable option.
4. Enter the Old Password
the User Profile.
5. Enter the New Password, then verify the new password within the
6. Click OK to save and add the changes to the running configuration and close the dialog.
7. Refer to the Status
error messages if something goes wrong in the transaction between the applet and the switch.
8. Click Cancel to close the dialog without committing updates to the running configuration.

7.3.3 Accessing SNMP v2/v3 Statistics

Refer to the Statistics screen for a read-only overview of SNMP V2/V3 events and their current values. The
screen also displays Usm Statistics (SNMP V3 specific events specific to the User-based Security Model) and
their values.
To edit an SNMP v3 user profile:
1. Select Management Access
is the existing protocol for the User Profile. The Authentication
Privacy Protocol
used to grant Authentication Protocol and Privacy Protocol permissions for
field for the current state of the requests made from applet. This field displays
> SNMP Access
Switch Management
from the main menu tree.
Edit button.
is the existing protocol for the User Profile.
Confirm New Password
from the main menu tree.
7-9
area.