Ap-Detection - Motorola WS5100 Series Cli Reference Manual

20-6 WS5100 Series Switch CLI Reference Guide

20.1.5 ap-detection

Wireless Configuration Commands
Configures access port detection parameters
Syntax
ap-detection
[approved|enable|mu-assisted-scan|timeout (approved|unapproved)]
ap-detection approved add <1-200> (MAC Address)(SSID)
ap-detection mu-assisted-scan(enable|refresh<300-86400>)
Parameters
aap-version
approved
enable
mu-assisted-scan
timeout <1-65535>
AP detection configuration commands
Sets the approved access port list
• add <1-200> – Adds an entry to the approved access port
list
• MAC Address – Select either:
• MAC– Define a MAC address
(in AA-BB-CC-DD-EE-FF format)
• any– Assigns any MAC address
• SSID – Select either:
• LINE–Enter a string up to 32 characters
• any– Assigns any SSID
Allows access ports to look for APs
Sets mobile unit assisted scanning configuration
• enable – Enables mobile unit assisted scanning
• refresh <30-86400> – Defines the period (in seconds)
used by all scan-capable mobile units are polled to scan
for neighboring access ports
The amount of time (in seconds) an AP remains in the list
after it is no longer seen
• approved
• unapproved