Viewing Ap Statistics - Motorola RFS Series Reference Manual

4-96 Motorola RF Switch System Reference Guide
3. Click the Add
4. Enter the device
hard-coded MAC address of the device.
5. Use the AP Type
AP-5131 or AP-7131 model Access Point, the Access Port conversion will render the Access Point a "thin"
Access Port.
6. From the Radio Settings
used.Available radio types are dependant on the
7. Enter a numerical value in the
The Radio Index is a numerical value assigned to the radio as a unique identifier. For example; 1, 2, or 3.
The index is helpful for differentiating radios of similar type and configuration.
8. Refer to the
messages if something goes wrong in the transaction between the applet and the switch.
9. If clustering is configured and the
available. Click the
10.Click OK to use the changes to the running configuration and close the dialog.
11.Click Cancel

4.7.2 Viewing AP Statistics

Refer to the Statistics
Performance information can be reviewed for either a 30 second or one hour interval. Use the Details button
to display additional information for an individual radio.
To view Radio Statistics:
1. Select Network
button to display at screen containing settings for adding a radio
MAC Address (the physical MAC address of the radio). Ensure this address is the actual
drop-down menu to define the radio type you would like to add. If adding an AP-4131,
section, select the radio type checkboxes corresponding to the type of AP radio
Radio Index
Status field for the current state of the requests made from applet. This field displays error
Cluster GUI
Apply to Cluster button to apply the AP radio settings to all members in the cluster.
to close the dialog without committing updates to the running configuration.
tab for information and high-level performance data for individual radios.
> Access Port Radios
AP Type selected above.
field for each selected radio.
feature is enabled the
from the main menu tree.
Apply to Cluster feature will be