Removal Of The Brake Discs; Overhauling The Front Brake Components - Ducati Monster 696 2009 Manual

section
G 3

Removal of the brake discs

A
The front brake discs consist of an inner carrier, which is mounted to the wheel, and an outer rotor. Both parts must be changed
together as a pair.
Remove the front wheel (Sect. G 1, Removal of the front wheel).
Unscrew the six screws (14) securing the brake disc to the wheel and remove the disc (13).
B
C
D

Overhauling the front brake components

Important
E
Critical safety components. The manufacturer of the brake caliper advises against servicing the internal components of calipers.
Incorrect overhaul of this component could endanger rider safety.
Operations should be limited to renewal of the pads, fasteners and bleeder assembly.
Refer to the exploded view at the beginning of this section for indications on renewal of the above components.
The brake disc must be clean without any signs of rust, oil, grease or dirt and no deep scoring.
F
To check brake disc wear, refer to the service limits given in the paragraph "Hydraulic brakes"(Sect. C 1.1).
G
H
L
M
N
P
30
Wheels - Suspension - Brakes
14 13
14
13
Monster 696/696+ - M.Y. 2009 - edition 00