Removing Outer Components - Ducati MULTISTRADA 1200S ABS 2015 Workshop Manual

Removing outer components

Remove the engine from the frame
Remove the timing components
Remove the camshaft assembly
Remove the generator side cover and the generator assembly
Remove the starter motor
Remove the clutch cover
Remove the clutch unit
Remove the oil pump
Remove the mesh filter
Undo the screw (1) and remove the oil breather valve (2) with the O-rings (3) from the engine.
Check the condition of O-rings (3) and replace them if necessary.
Unscrew and remove the oil filter support nipple (4) and remove also by-pass spring (5).
(Removing the
(Removing the timing outer
(Removing the
(Removing the starter
(Removing the clutch
(Removing the clutch).
(Removing the oil pump).
(Changing the engine oil and filter
engine).
covers).
camshafts).
(Removing the generator
motor).
cover).
cartridge).
cover).