Front Crossmember Support Plate - Subaru 2009 IMPREZA Service Manual

Hide thumbs Also See for 2009 IMPREZA:

3. Front Crossmember Support

1) Lift up the vehicle.

2) Remove the front under cover. <Ref. to EI-26,

REMOVAL, Front Under Cover.>

3) Remove the bolt and remove front crossmember

support plate.

• Large type (Turbo type)

• Small type

(1) Crossmember support plate

(2) Jack-up plate

B: INSTALLATION

Install in the reverse order of removal.

Tighten the small type crossmember support plate

together with stabilizer bracket.

After installing the stabilizer bracket to the cross-

member, tighten the crossmember support plate to-

Tightening torque:

Crossmember support plate:

60 N·m (6.1 kgf-m, 44.3 ft-lb)

Crossmember support plate (Tightened to-

gether with the stabilizer bracket):

25 N·m (2.5 kgf-m, 18.4 ft-lb)

Jack-up plate:

60 N·m (6.1 kgf-m, 44.3 ft-lb)

Front Crossmember Support Plate

FRONT SUSPENSION